Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To set an item in the fingerprint submenu:<br />
1. Print these instructions. To configure the fingerprint reader, you must turn your computer off and<br />
then on again.<br />
2. Save all open files, and exit all applications.<br />
3. Turn your computer off and then on again.<br />
4. When the logo screen is displayed, press F1. The ThinkPad Setup opens.<br />
5. Using the cursor keys, move to Security, and press Enter. The Security menu opens.<br />
6. Using the cursor keys, move to Fingerprint, and press Enter. The Fingerprint submenu opens.<br />
7. Using the cursor keys, move to an item you want to set. When that item is highlighted, press Enter.<br />
8. Set the items you want to set.<br />
9. Press F10 to exit.<br />
10. In the Setup Confirmation window, select Yes.<br />
Care for the fingerprint reader<br />
The following actions could damage the fingerprint reader or cause it not to work properly:<br />
• Scratching the surface of the reader with a hard, pointed object.<br />
• Scraping the surface of the reader with your fingernail or anything hard.<br />
• Using or touching the reader with a dirty finger.<br />
If you notice any of the following conditions, gently clean the surface of the reader with a dry, soft, lint-free<br />
cloth:<br />
• The surface of the reader is dirty or stained.<br />
• The surface of the reader is wet.<br />
• The reader often fails to enroll or authenticate your fingerprint.<br />
If your finger has any of the following conditions, you may not be able to register or authenticate it:<br />
• Your finger is wrinkled.<br />
• Your finger is rough, dry, or injured.<br />
• Your finger is very dry.<br />
• Your finger is stained with dirt, mud, or oil.<br />
• The surface of your finger is very different from when you enrolled your fingerprint.<br />
• Your finger is wet.<br />
• A finger is used that has not been enrolled.<br />
To improve the situation, try the following:<br />
• Clean or wipe your hands to remove any excess dirt or moisture from the fingers.<br />
• Enroll and use a different finger for authentication.<br />
• If your hands are too dry, apply lotion to them.<br />
Using a fingerprint reader in ThinkPad X220 Tablet and X220i Tablet<br />
Depending on the options you ordered, your computer may have an integrated fingerprint reader. By<br />
enrolling your fingerprint and associating it with a power-on password, a hard disk password, or both<br />
passwords beforehand, you can start the computer, log on to the system, and enter the ThinkPad Setup by<br />
100 <strong>User</strong> <strong>Guide</strong>