Dolby CP750 Digital Cinema Processor Manual - Projectionniste.net
Dolby CP750 Digital Cinema Processor Manual - Projectionniste.net
Dolby CP750 Digital Cinema Processor Manual - Projectionniste.net
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical Reference<br />
Aux Output<br />
Two‐channel, unbalanced analog, 200 mV reference level, 100 output impedance, RCA<br />
connectors, always routes channel pair 7/8 of 4xAES input for alternate uses such as H/I &<br />
VI‐N transmitters.<br />
Note:<br />
This fixed level output has no EQ and is not controlled by either the fader or mute<br />
controls.<br />
H/I Output<br />
1 channel, unbalanced analog, 70 mV fixed reference level, 100 output impedance, RCA<br />
connector, center‐weighted sum of Left, Center, Right<br />
7.1.3 Other Input/Output<br />
Ether<strong>net</strong> Port<br />
RJ‐45 for <strong>net</strong>work connection and PC setup software<br />
Automation Port<br />
25‐pin female D‐connector, floating ground<br />
RS-232 Port<br />
9‐pin female D‐connector<br />
Remote Port<br />
RJ‐45 connector for optional Cat. No. 868 Remote Fader (not an Ether<strong>net</strong> connection)<br />
Backup Power Connector<br />
For optional Cat. No. 994 External Power Supply<br />
AC Mains Input<br />
Unswitched IEC power inlet module<br />
USB Port<br />
For connection to PC to run setup software<br />
62 <strong>Dolby</strong> ® <strong>CP750</strong> <strong>Digital</strong> <strong>Cinema</strong> <strong>Processor</strong> <strong>Manual</strong>
Change language