Dolby CP750 Digital Cinema Processor Manual - Projectionniste.net

Rear-Panel Connector Descriptions and Types
7.1.14 Regulatory Notices
North America: This unit complies with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules, and Industry Canada ICES‐003 specifications. It is UL Listed for
both US and Canada.
Europe: This unit complies with the requirements of Low Voltage Directive 2006/95/EC and
EMC Directive 2004/108/EC and carries the CE marking accordingly.
Warranty
One‐year limited, parts and labor. Specifications subject to change without notice.
7.2 Rear-Panel Connector Descriptions and Types
All connectors with non‐standard pinouts are described in this section.
Table 7-1
Rear-Panel Connector Descriptions and Types
Panel Label Description Type
BACKUP POWER
4‐pin XLR for connecting the Cat. No. 994 back up
power supply
XLR F
RS-232 For ASCII command string automation control DB‐9 F
Ethernet For connection to the auditorium network RJ‐45
REMOTE For connection to Cat. No. 868 Remote Fader RJ‐45
4xAES IN 4 x AES/EBU input (eight‐channel PCM audio) DB‐25 F
AUTOMATION For theatre automation control input (momentary DB‐25 F
contact)
MAIN AUDIO OUTPUT Eight‐channel balanced floating analog output: DB‐25 M
L, C, R, Ls, Rs, Sw, 7, 8
MIC. INPUT 3‐pin, female XLR connector XLR F
MULTI-CHANNEL Eight‐channel balanced floating analog input for DB‐25 F
ANALOG INPUT external processor, such as a Dolby DA20
7.2.1 Backup Power Connector
Figure 7‐1
Figure 7-2
Figure 7-1
Backup Power Connector Detail
Dolby ® CP750 Digital Cinema Processor Manual 65