Installation & Setup User Guide - Best Access Systems

Installation & Setup User Guide
status and progress bar will be updated as the upgrade progresses.
8. Depending on the components that were installed, you may need to reboot
the computer. If you are prompted to do so, reboot the computer.
Attach the Hardware Key (B.A.S.I.S. License Server
Computer Only)
B.A.S.I.S. software is protected by a hardware security key. There are two types
of hardware security keys available for use with B.A.S.I.S.: parallel port and
USB. You may request either. Please remember to physically attach the hardware
key (“dongle” adapter) directly to the respective port on the computer that has
License Server installed in order for the software to run properly.
A hardware dongle is only needed on the server running License Server. Each
client computer running B.A.S.I.S. ET Third Edition uses a software license
instead of a hardware dongle.
Start the Communication Server
If you will be performing downloads to a PDA, the Communication Server must
be started. To run the Communication Server as an application:
1. Click the Start button, then select Programs > B.A.S.I.S. ET >
Communication Server.
2. The Communication Server will start. An icon will appear in the system tray,
and the Lnlcomsrvr.exe process will be listed in the Task Manager on the
Processes tab.
Install the New License
Install your new license using the License Administration application. For more
information, refer to Appendix K: The License Administration Application on
page 265.
revision 143 — 25