02.01.2015 Views

Installation & Setup User Guide - Best Access Systems

Installation & Setup User Guide - Best Access Systems

Installation & Setup User Guide - Best Access Systems

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Installation</strong> & <strong>Setup</strong> <strong>User</strong> <strong>Guide</strong><br />

• AWB/MWB - Always to the Right (Automatic White Balance/Manual<br />

White Balance)<br />

• R/B - Always to Left (Red - Green - Blue manual adjustments)<br />

• AF/OFF - Always to Left (Automatic Focus)<br />

When setting up the environment, minor adjustments will need to be made to the<br />

Zoom and Iris. Once the adjustments have been made, move the switch back to<br />

the zoom position.<br />

• Making adjustments to the zoom will bring the subject closer or further<br />

away. Optimally you want your subject to fill the pre-sized crop window, so<br />

that no additional crop adjustments will need to be made.<br />

• Making Iris adjustments should be made initially for the environment in<br />

which the camera is set up. It should not need further adjustment.<br />

EHK-283 (Enhance Lighting Kit)<br />

If you are using the enhance lighting kit, angle the flash at 45 degrees downward<br />

towards the subject to avoid flash wash-out. Additional Iris adjustments may be<br />

necessary when installing the kit. For more detailed instructions on how to<br />

configure capture with flash, refer to Chapter 6: Setting Up & Configuring a<br />

Capture Station.<br />

Note:<br />

Wait 10 to 15 seconds between capture flashes so that the flash recharges.<br />

revision 143 — 263

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!