Installation & Setup User Guide - Best Access Systems

Installation & Setup User Guide
9. The installation process will automatically restart because there are two
components (audio and video) that must be installed. Repeat steps 4-8, and
then proceed to step 10.
10. Installation of the Belkin VideoBus II is now complete.
11. To insure that your installation was successful and complete:
a. Click the Windows Start button, then right-click on My Computer and
select Properties from the right-click menu.
b. Click the Hardware tab.
c. Click [Device Manager].
d. If you expand “Imaging devices”, “Belkin USB VideoBus II, Video”
should now be listed. If you expand “Sound, video and game
controllers”, “Belkin USB VideoBus II, Audio” should be listed.
revision 143 — 69