Installation & Setup User Guide - Best Access Systems

Installation & Setup User Guide
Chapter 5:
CCD/CCTV Video Setup for USB
Devices
Live video capture can be supported via the USB port instead of a video card.
The Belkin USB VideoBus II (VideoBus) will accept any NTSC composite
video input and convert it into PC-compatible digital video and image formats. It
connects directly to the USB port. There is no need to open the computer to
install or configure cards. No power supply is needed - VideoBus is powered by
the USB connection.
Configuring Video Hardware & Software
Step 1: Check to Make Sure You Have All the Required
Video Hardware
This step lists the hardware required to set up a capture station or set up a CCTV
video station. Refer to the appropriate list.
If you’re setting up a capture station you need the following hardware:
• CAM-CCP-500KUSB Windows 2000 Image Capture Kit: CCP601
Digital Zoom (a 1/4-inch color CCD camera with auto focus/iris 32X zoom
lens, 450 lines, S-Video camera with built-in 16X AF lens, fixed diffused
light with tilt head, 110 VAC camera and light power supplies, 12-foot S-
Video cable, tripod with pan tilt mounts, USB adapter kit).
Note:
The CAM-500KUSB-EU Image Capture Kit contains everything listed
above, except that it contains European cables and the tripod has European
threads.
• Replacement fixed diffused light with power supply.
• DPS060200-P5: Replacement camera power supply for CAM-CCP-
500KUSB.
• EHK-K42U-A Professional Continuous Lighting Kit: Two 600-watt
quartz lights, two bounce back white umbrellas, two stands, mounting
brackets and carrying case.
If you’re setting up a CCTV video station you need the following hardware:
• CCD Video camera: The camera must output video in one of the following
formats:
– RGB
– NTSC S-Video
– NTSC Composite
– PAL S-Video
– PAL Composite
revision 143 — 65