Installation & Setup User Guide - Best Access Systems

5: CCD/CCTV Video Setup for USB Devices
9. Windows will finish installing software for the device. Click [Finish].
10. The installation process will automatically restart because there are two
components (audio and video) that must be installed. Repeat step 4 through
9.
Step 3: Video Software Settings
Video Software Settings for a CCTV Station
• Video Source, Input Standard and Input Format. Video Verification uses
the video source, input standard and input format configured in the
Workstations form of ID CredentialCenter’s/System Administration’s
Workstations folder. Consult the ID CredentialCenter/System
Administration User Guide on how to make those adjustments in the
Workstations folder.
• Video Colors and Video Sync Mode. Video Verification displays live
video using the color adjustments and sync mode configured in the
FPG3D32 application which shipped with your FlashPoint board. Consult
your FlashPoint User’s Manual on how to make those adjustments. (The
sync mode option is configured in the FPG3D32 application’s Advanced
Configuration window. When enabled it causes unstable video coming from
a VCR to stop jumping up and down and settle down into a stable picture,
though there will be a narrow strip of static across the bottom.)
72 — revision 143