Installation & Setup User Guide - Best Access Systems

8: Installing and Configuring WirelessOffice Messaging Software Version 5.0
Configure the Modem
Important:
The modem must already be added to your computer via the Windows
Control Panel before it can be used by WirelessOffice.
1. In the program folder, double-click on WirelessOffice Administrator.
2. From the Tools menu, select Server Configuration.
3. The Server Configuration Wizard window will open. Click the Modems
tab.
4. Make sure that the modem is available, and then click [Add].
5. The Modem Wizard - Step One window opens. Select the modem, and then
click [Finish].
6. The modem will now be listed on the Modems tab. Click [OK] to close the
Server Configuration window.
98 — revision 143