Installation & Setup User Guide - Best Access Systems

O: Ports Used by B.A.S.I.S.
Port Function B.A.S.I.S. version Where port can be changed
4061 DataExchange B.A.S.I.S. 5.9 and
newer
4062 DataExchange B.A.S.I.S. 5.9 and
newer
8189 License Server B.A.S.I.S. 5.7 or
newer
Can be changed in ACS.INI [Service] section
DESocketPort *
Can be changed in ACS.INI [Service] section DERpcPort *
To change the License Server port:
1. The value for the Port key in the [License Server]
section of the ACS.INI file must be changed on every
B.A.S.I.S. machine. The default is:
[License Server]
Port=8189
2. The following must be added to the
LicenseServerConfig\Server.properties file (file
content is case-sensitive!):
Port=8189 where '8189' is replaced by the desired port
number.
(This line is not present by default. The whole file is
not present by default; it is created when the admin
username or password is changed.)
8190 Web Utility
Server
9999 License
Administration
Only used with 5.7 and
5.8 builds prior to
5.8.310
B.A.S.I.S. 5.7 and
newer
To change the License Administration port, the following
must be added to the
LicenseServerConfig\Server.properties file (file content
is case sensitive!):
AdminPort=9999 where '9999' is replaced by the desired
port number.
(This line is not present by default. The whole file is not
present by default; it is created when the admin username or
password is changed.)
Note:
The License Administration shortcut installed by
B.A.S.I.S. can’t be used if the License
Administration port has been changed. To access
the License Administration after the port has been
changed, simply point the browser to http://
licenseserver:9999 (where ‘licenseserver’ is the
name of the machine running Licenser Server and
‘9999’ is the port number for License
Administration).
* To change these ports, the ACS.INI settings must be changed on all machines
(server and clients).
** To change these ports for a given monitoring station, the ACS.INI settings
only need to be changed on that machine.
320 — revision 143