Chapter 5. Record Sequence Separate Files Separate Files 5 - 6 IJPDS Formats The fonts, fixed files, and data for a job can placed in separate files to be read separately by the data station. Presently, only the KODAK VERSAMARK DS3000 series printing systems support the concept of separate files. The possible variations for separate files are provided in the following list along with the required record sequences for each type of file. Fonts Only JC2, FAR (optional), font records, EOJ. Fixed Files Only JC2, LFF, fixed file records, EFF, EOJ. Fonts and Fixed Files JC2, FAR (optional), font records, LFF, fixed file records, EFF, EOJ. Data Only JC2, PHR, FAR, PLR, SDC/SOD, document records, EOJ. Fixed Files and Data JC2, PHR, PLR, FAR, LFF, fixed file records, EFF, SDC/SOD, document records, EOJ. Fonts and Data JC2, PHR, PLR, FAR (optional), font records, SDC/SOD, document records, EOJ. The “Data Only” and “Fixed Files and Data” files contain a FAR record that specifies the fonts that must be loaded for the job. It should be noted that there is no check available to determine if the correct fixed files are loaded.
Appendix A. Record References The records in IJPDS job files are cross-referenced in this appendix so that if you have the record name or control code you can quickly find other information about the record. Table A.1 lists all IJPDS records by acronym in alphabetic order. Table A.2 lists all IJPDS records by control code in numeric order. Both tables provide a brief description of the purpose of the record and a page reference to the detailed description in Chapter 4. Reference Guide A - 1