ijpds formats.book - Kodak

More documents

Recommendations

Info

Chapter 4. Record Formats Set Logical Function (SLF) 4 - 50 IJPDS Formats Refer to the following table for a definition of each logical function. For each dot, if X is the existing value (0 or 1) and Y is the new value (0 or 1), the table shows the resulting value. 00 01 02 03 04 05 06 07 X Y Y (X ∨ Y) (X ∧ Y) (X | Y) (-Y) [X ∨ (-Y)] [X ∧ (-Y)] [X | (-Y)] 0 0 0 0 0 0 1 1 0 1 0 1 1 1 0 1 0 0 0 0 1 0 0 1 0 1 1 1 1 0 1 1 1 1 1 0 0 1 0 1
Chapter 4. Record Formats Fill a Rectangular Area (BOX) Fill a Rectangular Area (BOX) The BOX record defines the size of an area that is to be filled with a black or white fill pattern. The fill pattern is placed in the page bitmap using the current logical function as defined by a previous SLF record or by the default function (OR). Byte Position Bytes Field Name Description After this record, the cursor position is at the current X position and the current Y position plus the height of the box. The height and width of the box are in the upright orientation. 1-2 2 Record Length The length of this record, in binary, including the record length field. For example, hex 00 09 specifies a record length of 9 bytes. 3 1 Cyclic Record Count A binary cyclic record count using modulo 256. Each record in the job is counted, starting with hex 01 for the first record. The 255th record is hex FF and the 256th record is hex 00. This count is used to verify record sequence. 4 1 Control Code A binary code that identifies the record type. A value of hex 27 identifies the BOX record. 5-6 2 Height An unsigned binary value representing the height of the box in dots. The range depends on the printer and the PLR record. The height is measured down the length of the page in the Y direction when looking at the substrate in the direction it is moving. For example, hex 00 37 specifies a box height of 55 dots. 7-8 2 Width An unsigned binary value representing the width of the box in dots. The range is printer and printhead dependent. For example, the range is 1-4096 for systems using four stitched 4-inch printheads and 1-1024 for systems with one 4-inch printhead. The width is measured across the width of the page in the X direction when looking at the substrate in the direction it is moving. For example, hex 06 A1 specifies a width of 1697 dots. 9 1 Fill Pattern A binary value that specifies the fill pattern. Hex 00 = white and hex 01 = black. Some KODAK VERSAMARK printers support clipping of the image created by a BOX record. Clipping means that if part of the box falls outside the buffer, the part that is in the buffer is printed and the cursor is moved. The cursor is moved as if the entire image was printed, even though it may fall outside the buffer. See Appendix C to determine if your printer supports clipping for the BOX record. If clipping is not supported and part of the box falls outside the buffer, none of the box is printed and the cursor is not moved. In both cases (clipping supported and clipping not supported), a message is generated only if the image falls outside the limits set by the RCR record (or the default range if no RCR). Refer to the RCR record description. Reference Guide 4 - 51
Page 1:
KODAK VERSAMARK IJPDS Formats Refer
Page 4 and 5:
FCC Compliance Statement This equip
Page 6 and 7:
Scope Text Notations This manual us
Page 9 and 10:
Contents Chapter 1. Overview KODAK
Page 11:
Contents Appendix D. Indexing and M
Page 15 and 16:
Chapter 1. Overview KODAK VERSAMARK
Page 17 and 18:
Data Station RIPs Chapter 1. Overvi
Page 19 and 20:
Pages and Page Buffers Chapter 1. O
Page 21 and 22:
Chapter 1. Overview Image Positions
Page 23 and 24:
Character cell Cursor positions Sta
Page 25 and 26:
Cursor position Positive Y offset f
Page 27 and 28:
Definition Records for Category I F
Page 29 and 30:
Fixed Files Chapter 1. Overview Fix
Page 31 and 32:
Two Documents per Cue Chapter 1. Ov
Page 33 and 34:
Tape Specifications Chapter 2. Magn
Page 35 and 36:
Tape Labels Chapter 2. Magnetic Tap
Page 37:
Tape Blocking Chapter 2. Magnetic T
Page 41 and 42: Record Information Chapter 4. Recor
Page 43 and 44: Chapter 4. Record Formats Compressi
Page 45 and 46: Chapter 4. Record Formats Job Contr
Page 47 and 48: Select RIP (RIP) The RIP record is
Page 49 and 50: Byte Position Bytes Field Name Desc
Page 51 and 52: Chapter 4. Record Formats Set Resol
Page 53 and 54: Chapter 4. Record Formats Super Fon
Page 55 and 56: Chapter 4. Record Formats Character
Page 61 and 62: Chapter 4. Record Formats Super Fon
Page 63 and 64: Chapter 4. Record Formats Character
Page 65 and 66: Load Fixed File (LFF) Byte Position
Page 67 and 68: Chapter 4. Record Formats Range Che
Page 73 and 74: Set Position (SPX) Byte Position By
Page 75 and 76: Chapter 4. Record Formats Set Relat
Page 77 and 78: Cursor Restore (CSR) Byte Position
Page 79 and 80: Set Font (SFT) Byte Position Bytes
Page 81 and 82: Image a Line (IML) Byte Position By
Page 83 and 84: Chapter 4. Record Formats Multi-Par
Page 85 and 86: Go to Fixed File (GFF) Byte Positio
Page 87 and 88: Chapter 4. Record Formats Unformatt
Page 89: Chapter 4. Record Formats Set Logic
Page 93 and 94: Chapter 4. Record Formats Compresse
Page 95 and 96: Chapter 4. Record Formats Set Page
Page 97 and 98: Wait for Cue (WFC) Chapter 4. Recor
Page 99 and 100: Message (MSG) Byte Position Bytes F
Page 101 and 102: No Operation (NOP) Byte Position By
Page 103 and 104: Chapter 4. Record Formats Job Contr
Page 105 and 106: Single-RIP System Chapter 5. Record
Page 107 and 108: Figure 5.1 Single RIP-record sequen
Page 109 and 110: Figure 5.2 Multiple RIP sequence 1
Page 111 and 112: Appendix A. Record References The r
Page 113 and 114: Table A.1 Records by acronym (Conti
Page 115: Table A.2 Records by control code (
Page 118 and 119: Appendix B. Sample Font Coding Cate
Page 120 and 121: Appendix B. Sample Font Coding Cate
Page 123 and 124: Appendix C. Printer Support for IJP
Page 125 and 126: Table C.1 Printer support for IJPDS
Page 127 and 128: Appendix D. Indexing and Multi-File
Page 129 and 130: Multiple-File (Very Large) Jobs Fil
Page 131 and 132: Monochrome RIP Data Structure CMYK
Page 133: Example of File Writing (in MFC and
Page 136 and 137: Glossary IJPDS Formats character of
Page 138 and 139: Glossary IJPDS Formats page buffer
Page 142:
0113991-602 0113991-603 © Kodak Ve
show all

ijpds formats.book - Kodak

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?