19.04.2015 Views

Untitled - Flannery Plant Hire

Untitled - Flannery Plant Hire

Untitled - Flannery Plant Hire

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

PARKING THE MACHINE ON SLOPES<br />

DRIVING THE MACHINE<br />

WARNING: Avoid parking machine on slopes. The<br />

machine may tip over, possibly resulting in personal<br />

injury.<br />

If parking the machine on a slope is unavoidable:<br />

• Thrust the bucket teeth into the ground.<br />

• Return the control levers to neutral and pull pilot control<br />

shut-off lever (2) to the LOCK position.<br />

• Block both tracks.<br />

M104-05-014<br />

PARKING THE MACHINE<br />

1. Park the machine on a level surface.<br />

2. Lower the bucket to the ground.<br />

3. Turn the auto-idle switch off.<br />

Slow Idle<br />

1<br />

IMPORTANT: Turbocharger may be damaged if the engine<br />

is not properly shut down.<br />

4. Turn engine control dial (1) counterclockwise to the stop<br />

(the slow idle position). Run the engine approximately 5<br />

minutes to cool the engine.<br />

5. Turn the key switch to OFF. Remove the key from the key<br />

switch.<br />

6. Pull pilot control shut-off lever (2) to the LOCK position.<br />

M1U1-01-033<br />

2<br />

IMPORTANT: Protect cab electrical components from bad<br />

weather. Always close windows, roof vent<br />

and cab door when parking the machine.<br />

7. Close windows, roof vent, and cab door.<br />

8. Lock all access doors and compartments.<br />

Lock Position<br />

M1U1-01-025<br />

4-

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!