Untitled - Flannery Plant Hire

MAINTENANCE
C. TRANSMISSION (See Page 7-23)
1. Pump
Transmission
2. Swing
Reduction
Gear
3. Travel
Reduction
Gear
Parts
Quantity
Oil Level Check 1
ZX180-3, 200-3, 270-3 1.0 L
Class
(1.1 US qt)
Change
1.4 L
ZX330-3 Class
(1.5 US qt)
Oil Level Check 1
3.2 L
ZX120-3 Class
(3.4 US qt)
6.2 L
ZX180-3, 200-3 Class
(1.6 US gal)
ZX270-3 Class (Except 9.1 L
Change
280LC-3, 280LCN-3) (2.4 US gal)
11.7 L
ZX280LC-3, 280LCN-3
(3.1 US gal)
17.0 L
ZX330-3 Class
(4.5 US gal)
Oil Level Check 2
4.0 L ×2
ZX120-3 Class
(4.2 US qt)
6.8 L ×2
ZX180-3, 200-3 Class
(1.8 US gal)
Change
ZX270-3 Class (Except 7.8 L ×2
280LC-3, 280LCN-3) (2.1 US gal)
ZX280LC-3, 280LCN-3, 9.2 L ×2
330-3 Class
(2.4 US gal)
Interval (hours)
8 50 100 250 500 1000 2000
D. HYDRAULIC SYSTEM (See Page 7-27)
Parts
Quantity
8 50 100
Interval (hours)
250 300 500 1000 1500 2500 5000
1. Check Hydraulic Oil Level 1
ZX120-3 Class
130 L
(34.3 US gal)
✸ ✸ ✸ ✸
ZX180-3 Class
190 L
(50.2 US gal)
✸ ✸ ✸ ✸
ZX210-3,
200 L
2. Change Hydraulic 210LC-3 (52.8 US gal)
✸ ✸ ✸ ✸
Oil
ZX210LCN-3, 170 L
240N-3
(44.9 US gal)
✸ ✸ ✸ ✸
ZX270-3 Class
243 L
(64.2 US gal)
✸ ✸ ✸ ✸
ZX330-3 Class
298 L
(78.7 US gal)
3. Suction Filter Cleaning 1 When changing hydraulic oil
4. Replace Hydraulic Oil Tank Filter 1 ✸✸ ✸ ✸
5. Replace Pilot Oil Filter 1
6. Replace Air Breather Element 1
7. Check Hoses and
Lines
for leaks –
for cracks, bend, etc. –
NOTE: ✸ Changing interval differs according to the brand of hydraulic oil used, kind of filter element or average attachment
operating availability. Refer to the “changing intervals of hydraulic oil and full flow filter element” on page 7-29.
See recommended oil chart.
✸✸ While demolition and logging work.
7-11