Untitled - Flannery Plant Hire

H. ELECTRICAL SYSTEM (See Page 7-62)
I. MISCELLANEOUS (See Page 7-68)
MAINTENANCE
Parts
Quantity
Interval (hours)
8 50 100 250 500 1000 2000 4000
1. Check Bucket Teeth for Wear and Looseness —
2. Change Bucket — As required
3. Convert Bucket Connection Into Face Shovel — As required
4. Adjust Bucket Linkage 1 As required
5. Remove Travel Levers 2 As required
6. Check and Replace Seat Belt 1 Every 3 years (Replace)
7. Check Windshield Fluid Level 1 As required
8. Check Track Sag 2
9. Check Air
Conditioner
Filter (Opt.)
Circulating Air
Filter
Fresh Air Filter
Cleaning 1
Replacement 1 After cleaning 6 times or so
Cleaning 1
Replacement 1 After cleaning 6 times or so
10. Check Air Conditioner (Opt.) —
11. Clean Cab Floor — As required
12. Retighten Cylinder Head Bolt — XAs required
13. Inspect and Adjust Valve Clearance — X
14. Measure Engine Compression Pressure — X
15. Check Starter and Alternator — X
16. Check and Replace EGR Device — XAs required
17. Check Tightening Torque of Bolts and Nuts — HH
NOTE: X Contact your authorized dealer for maintenance.
HH Maintenance required only during first time check.
7-13