Untitled - Flannery Plant Hire

OPERATOR'S STATION
Screen Display when Maintenance Information Display
is ON
• When only one item displays
1. If turning the key switch to the ON position, the starting
screen displays. Then, the scheduled maintenance screen
for the item whose change interval has expired displays
for three to ten seconds. Finally the basic screen displays.
(In the right example, Hydraulic Oil applies.)
NOTE: For a machine which the basic screen is displayed according
to a password on , the scheduled maintenance
screen for the item whose change interval has expired
displays for three to ten seconds, after the password is
input successfully and the determination key is pushed.
And then the basic screen displays.
2. If data is reset, push the reset key while the scheduled
maintenance screen is displayed.
The message “Reset Data. OK?” displays. Then, push the
determination key.
The value of remaining hours is reset to that of change
Interval. Previous change date/hour is updated with current
date and time.
Starting Screen
T1V1-05-01-115
Back Key
Reset Key
NOTE: When pushing the back key while the maintenance
information display screen is displayed, return to the
basic screen.
Maintenance Information Display Screen
T1V5-05-01-170
NOTE: When pushing the back key while reset screen is displayed,
return to the maintenance information display
screen.
Back Key
Reset Screen
Determination
Key
T1V5-05-01-171
Basic Screen
T1V1-05-01-123
1-39