Untitled - Flannery Plant Hire

SPECIFICATIONS
BUCKET TYPES AND APPLICATIONS
ZX110-3, 110M-3
Bucket
Hoe Bucket
Reinforced Hoe
Bucket
Bucket Capacity
m 3 (yd 3 )
PCSA
Heaped
CECE
Heaped
With Side
Cutters
Bucket Width
mm (in)
Without Side
Cutters
0.19 (0.25) 0.17 550 (22”) 450 (18”)
0.30 (0.39) 0.25 700 (28”) 580 (23”)
0.40 (0.52) 0.33 800 (31”) 680 (27”)
1.96 m
(6' 5")
Arm
Front-End Attachment
2.26 m
(7' 5")
Arm
2.81 m
(9' 3")
Arm
2.26 m
(7' 5") Arm
and extension
0.45 (0.59) 0.40 970 (38”) 850 (33”) * [ ] −
0.50 (0.65) 0.45 1010 (40”) 890 (35”) − [ ] −
0.59 (0.77) 0.50 1070 (42”) 950 (37”) − −
0.45 (0.59) 0.40 970 (38") 850 (33") * [ ] −
One Point Ripper − − ■ [−] ■ [−] − −
Slope-Finishing
Blade
− 1000 (39") x 1600 (63") −
[ ]: ZX110M-3
V-Type Bucket − 45°
−
NOTE: • Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
− : Not applicable (not warrantable)
• Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m 3 (2700 lb/yd 3 ) as a standard.
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m 3 (1850 lb/yd 3 ) as a standard.
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
• * Applicable only to 700 mm (28 in) grouser shoe.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
12-