Untitled - Flannery Plant Hire

OPERATING THE MACHINE
ATTACHMENT PEDAL (HYDRAULIC BREAKER)
(OPTIONAL)
1
The breaker can be operated using attachment pedal (1) located
on the right front of the seat, as illustrated.
CAUTION: Be sure to lock attachment pedal (1) with
pedal lock (2) when attachment pedal (1) is not in use.
1. Select the hydraulic breaker icon on monitor work mode
selection screen (4). Refer to the descriptions about the
work mode on page 5-9 for work mode selecting procedures.
2. Move pedal lock (2) forward to unlock attachment pedal
(1).
3. Push down on attachment pedal (1) to operate the breaker.
Loosen the stopper bolt (3) until stopper bolt (3) comes
in contact with the bracket in attachment pedal (1) neutral
to prevent attachment pedal (1) from being stepped
backward.
4. Remove foot from attachment pedal (1) to stop the
breaker.
5. Always keep attachment pedal (1) locked with pedal lock
(2) when attachment pedal (1) is not in use.
M1U1-05-008
4
T1V5-05-01-109
IMPORTANT: When operating a hydraulic breaker, do
not step on attachment pedal (1) rearward.
Damage to the hydraulic breaker may result.
1
2
Locked Attachment Pedal
M1J1-13-002
1
2
3
Unlocked Attachment Pedal
M1J1-13-003
5-