ES4626-SFP Management Guide.pdf

Click “LACP port group configuration” to enter configuration page.
• Group Num: group number
• Load balance mode: includes src-mac, dst-mac, dst-src-mac, src-ip, dst-ip,
dst-src-ip
• Operation type: Add port group or Remove port group
Fill in group Num, select load balance mode and select operation type as Add port group.
Click Apply to add the group.
After finishing the group configuration, the configured port information will be shown
under the configuration table.
4.6.2 LACP port configuration
Click LACP port configuration to enter configuration page
Click Apply button to add port into the group.
Display port member
Select a group num in port configuration and the information of port member will be
shown under the configuration table.
• Port: name of port member
Port mode: active or passive
168