ES4626-SFP Management Guide.pdf

different parameters (such as address-family or IPv4 address)
Example:
Switch# clear ip bgp ipv4 unicast dampening
17.8.3.30 clear ip bgp flap-statistics
Command:clear ip bgp [] flap-statistics
[|]
Function: For resetting BGP routing dampening statistics messages.
Parameter: : address-family such as “ipv4 unicast”
: IP address and mask
Default: None
Command Mode: Admin mode
Usage Guide: It is possible to clear BGP routing dampening statistic messages and state
by different parameters (such as address-family or IPv4 address)
Example:
Switch#clear ip bgp ipv4 unicast flap-statistics
17.8.3.31 distance
Command: distance []
no distance []
Function: Set the manage distance of the routing prefix. The “no distance
[]” command restores to the default value
Parameter: : Manage distance
: Routing prefix
: Access-list name
Default: Not set
Command Mode: BGP route mode
Usage Guide: Set the manage distance for specified BGP route as the path selecting
basis
Example:
Switch(config-router)# distance 90 10.1.1.64/32
17.8.3.32 distance bgp
Command: distance bgp
no distance bgp [ ]
Function: Set the BGP protocol manage distance. The “no distance bgp [
]” command restores the manage distance to default value
Parameter: Respectively the EBGP, IBGP and LOCAL manage distance of the BGP
585