ES4626-SFP Management Guide.pdf

Command: router rip
no router rip
Function: Enable the RIP routing process and enter the RIP mode; the “no router rip”
command closes the RIP routing protocol
Default: Not running RIP route
Command Mode: Global mode
Usage Guide: This command is the switch for starting the RIP routing protocol which is
required to be open before configuring other RIP protocol commands.
Example: Enable the RIP protocol mode
Switch(config)#router rip
Switch(config-router)#
17.4.3.31 send-lifetime
Command: send-lifetime {| duration| infinite}
no send-lifetime
Function: Use this command to specify a key on the keychain as the time period of
sending keys. The “no send-lifetime” cancels this configuration.
Parameter: parameter specifies the starting time of the time period, which
is :
={ |
}
Specify the concrete valid time of accept-lifetime in hours,
minutes and second
Specifies the date of valid, ranging between 1 -31
month> Specifies the month of valid shown with the first three letters of the
month, such as Jan
Specifies the year of valid start, ranging between 1993 - 2035
={ |
}
Specifies the due of the time period, of which the form should be:
={ |
}
Specify the concrete valid time of accept-lifetime in hours, minutes
and second
Specifies the date of valid, ranging between 1 -31
Specifies the month of valid shown with the first three letters of the
month, such as Jan
Specifies the year of valid start, ranging between 1993 -2035
456