ES4626-SFP Management Guide.pdf

{host-destination}} [precedence ] [tos
][time-range]
Functions: Define a extended numeric MAC-IP ACL rule, ‘No’ command deletes a
extended numeric MAC-IP ACL access-list rule.
Parameters: num access-list serial No. this is a decimal’s No. from 3100-3199.; deny if
rules are matching, deny to access; permit if rules are matching, permit to access;
any-source-mac: any source MAC address; any-destination-mac: any destination MAC
address; host_smac , smac: source MAC address; smac-mask: mask (reverse mask)
of source MAC address ; host_dmac , dmas destination MAC address; dmac-mask
mask (reverse mask) of destination MAC address; protocol No. of name or IP protocol.
It can be a key word: eigrp, gre, icmp, igmp, igrp, ip, ipinip, ospf, tcp, or udp, or an integer
from 0-255 of list No. of IP address. Use key word ‘ip’ to match all Internet protocols
(including ICMP, TCP, AND UDP) list; source-host-ip, source No. of source network
or source host of packet delivery. Numbers of 32-bit binary system with dotted decimal
notation expression; host: means the address is the IP address of source host, otherwise
the IP address of network; source-wildcard: reverse of source IP. Numbers of 32-bit
binary system expressed by decimal’s numbers with four-point separated, reverse mask;
destination-host-ip, destination No. of destination network or host to which packets are
delivered. Numbers of 32-bit binary system with dotted decimal notation expression; host:
means the address is the that the destination host address, otherwise the network IP
address; destination-wildcard: mask of destination. I Numbers of 32-bit binary system
expressed by decimal’s numbers with four-point separated, reverse mask;
s-port(optional): means the need to match TCP/UDP source port; port1(optional):
value of TCP/UDP source interface No., Interface No. is an integer from 0-65535;
d-port(optional): means need to match TCP/UDP destination interface; , the
down boundary of source port; , the up boundary of source port;
port3(optional): value of TCP/UDP destination interface No., Interface No. is an integer
from 0-65535; , the down boundary of destination port;, the up
boundary of destination port; [ack] [fin] [psh] [rst] [urg] [syn],(optional) only for TCP
protocol, multi-choices of tag positions are available, and when TCP data reports the
configuration of corresponding position, then initialization of TCP data report is enabled to
form a match when in connection; precedence (optional) packets can be filtered by
priority which is a number from 0-7; tos (optional) packets can be filtered by service type
which ia number from 0-15; icmp-type (optional) ICMP packets can be filtered by
packet type which is a number from 0-255; icmp-code (optional) ICMP packets can be
filtered by packet code which is a number from 0-255; igmp-type (optional) ICMP
packets can be filtered by IGMP packet name or packet type which is a number from
0-255; , name of time range
814