11.06.2015 Views

ES4626-SFP Management Guide.pdf

ES4626-SFP Management Guide.pdf

ES4626-SFP Management Guide.pdf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

originating side will then send an OPEN excluded the capability to reestablish the<br />

connection. With this capability, the side configured with in prefix-list filter rules will<br />

transmit its own filter rules to the peer, the peer group will apply this rule as its own out<br />

rules, so to avoid sending route which will be denied by the partner.<br />

Example:<br />

Switch(config-router)#neighbor 10.1.1.66 capability orf prefix-list both<br />

Relevant Commands: neighbor capability, no neighbor capability<br />

17.8.3.45 neighbor collide-established<br />

Command: neighbor {|} collide-established<br />

no neighbor {|} collide-established<br />

Function: Enable the collision check and settlement in the TCP connection collision.<br />

The “no neighbor {|} collide-established” command disables the<br />

TCP connection collision settlement<br />

Parameter: : Neighbor IP address<br />

: Name of the peer<br />

Usage <strong>Guide</strong>: This command is for settling the problem that multi-connection among<br />

peers due to TCP connection collision. Connections created with this option on will<br />

always be check even at established state. And it will be checked if local side IP is larger<br />

than partner IP when collides. If yes, the original connection will be deleted, and if not the<br />

option will be configured to only checks when the connection originated from local side at<br />

open sent and open confirm state.<br />

Command Mode: route mode and address family mode<br />

Default: Disabled and Unavailable<br />

Example: Switch(config-router)#neighbor 10.1.1.64 collide-established<br />

17.8.3.46 neighbor default-originate<br />

Command: neighbor {|} default-originate [route-map ]<br />

no neighbor {|} default-originate [route-map ]<br />

Function: Configures whether enables transmitting default route to the specific<br />

neighbor. The “no neighbor {|} default-originate [route-map<br />

]” command configures not sending default route to neighbors<br />

Parameter: : IP address of the neighbor<br />

: Name of the peer<br />

: Name of route mirror<br />

Default: Not sending default route<br />

Command Mode: BGP route mode and address-family mode<br />

Usage <strong>Guide</strong>: With this option, the default route of local side will be transmitted to<br />

593

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!