ES4626-SFP Management Guide.pdf

no snmp-server group {NoauthNopriv|AuthNopriv|AuthPriv}
Function:This command is used to configure a new group; the “no” form of this
command deletes this group.
Command Mode: Global Mode
Parameter: group name which includes 1-32 characters
NoauthNopriv Applies the non recognizing and non encrypting safety level
AuthNopriv Applies the recognizing but non encrypting safety level
AuthPriv Applies the recognizing and encrypting safety level
Name of readable view which includes 1-32 characters
Name of writable view which includes 1-32 characters
Name of trappable view which includes 1-32 characters
Usage Guide:There is a default view “v1defaultviewname” in the system. It is
recommended to use this view as the view name of the notification. If the read or write
view name is empty, corresponding operation will be disabled.
Example:Create a group CompanyGroup, with the safety level of recognizing
andencrypting, the read viewname isreadview, and the writing is disabled.
Switch (Config)#snmp-server group CompanyGroup AuthPriv read readview
deletet group
Switch (Config)#no snmp-server group CompanyGroup AuthPriv
2.4.3.17 snmp-server SecurityIP enable
Command: snmp-server SecurityIP enable
snmp-server SecurityIP disable
Function: Enable/disable the safety IP address authentication on NMS manage station
Command Mode:Global Mode
Default:Enable the safety IP address authentication function
Example:
Disable the safety IP address authentication function
Switch(config)#snmp-server securityip disable
2.4.3.18 snmp-server view
Command: snmp-server view {include|exclude}
no snmp-server view
Function: This command is used to create or renew the view information; the “no" form
of this command deletes the view information
Command Mode:Global Mode
Parameter: view name, containing 1-32 characters;
is OID number or corresponding node name, containing 1-255 characters.
85