ES4626-SFP Management Guide.pdf

Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
Neighbor Count is 1, Adjacent neighbor count is 1
Displayed information
Explanations
Vlan1 is up, line protocol is up
Let the interface up both logically and
physically
IPv6 Prefixes
fe80::203:fff:fe01:257c/64 (Link-Local
IPv6 address of the interface and the
length of the prefix
Address)
2001:1:1::1/64
OSPFv3 Process (*null*)
Ospfv3 process the interface belongs
Area 0.0.0.1
Area the interface belongs
Instance ID 0 Instance ID is 0
Router ID 192.168.2.2, Network Type Process ID; Router ID; Network Type; Cost
BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority
1
LAS transmission delay on the interface;
state; electing the priority of the layer 3
switch.
Designated Router (ID) 192.168.2.2 Specifying layer 3 switch
Interface Address fe80::203:fff:fe01:257c
Backup Designated Router (ID) Back up designated layer 3 switch
192.168.2.3
Interface Address fe80::203:fff:fe01:d28
Timer interval configured, Hello 10, OSPF protocol timer; including hello
Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:10
packet, poll interval packets, router dead,
router retransmission.
Neighbor Count is 1, Adjacent neighbor Numbers of the adjacent layer 3 switch;
count is 1
number of the layer 3 switches established
with neighbor relation
17.7.5.1.10 show ipv6 ospf neighbor
Command: show ipv6 ospf [] neighbor [ | detail |
detail ]
Function: Show OSPF adjacent point messages
Parameter: is process tag, which is a character string
is the neighbor ID shown in IPv4 address format
detail: Show neighbor details
name of the interface
554