Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

APPENDIX 1 MESSAGES AND LEDSENGLISH VERSION EO1-33089APPENDIX 1 MESSAGES AND LEDSAPPENDIX 1 MESSAGES AND LEDSAppendix 1 describes the LCD messages displayed on the operation panel.Symbols in the message1: : The LED is illuminated. : The LED is flashing. •: The LED is unlit.2: ****: the number of unprinted media. Up to 9999 (in pieces)3: %%,%%%,%%%: Remaining memory size of the external memory: 0 to 09,999,999 (in K bytes)4: ####: Remaining memory size for PC commands storage area in the internal memory: 0 to 3072 (in K bytes)5: &&&&: Remaining memory size for writable characters storage area: 0 to 3147 (in K bytes)No.LCD MessageLED IndicationEA1- 1Printer StatusRestoration byRESTART keyAcceptance ofStatus Request/Reset CommandONLINE ERROR Yes/No Yes/NoON LINE • In online mode ----- Yes1 In online mode (The printer in----- YesON LINE •communication)2 HEAD OPEN • •The print head block is opened in ----- Yesonline mode.3 PAUSE • • The printer is paused. Yes YesA parity, overrun, or framing error has Yes Yes4 COMMS ERROR • occurred during communicationthrough the RS-232C.5 PAPER JAM • The media is jammed during paper Yes Yesfeed.6 CUTTER ERROR • A problem has occurred with the cutter Yes Yesmodule.7 NO PAPER • The media has run out, or the media is Yes Yesnot loaded properly.8 NO RIBBON • The ribbon has run out. Yes Yes9 HEAD OPEN • Feed or printing was attempted with Yes Yesthe print head block open.10 HEAD ERROR • There is a problem with the print head. Yes Yes11 EXCESS HEAD TEMP • The print head is overheated. No YesThe ribbon has been torn. A problem Yes Yes12 RIBBON ERROR • has occurred with the sensor thatdetermines the torque for the ribbonmotor.13 REWIND FULL • An overflow error has occurred in the Yes Yesrewinder unit.SAVING####KB/&&&&KBWritable character or PC command ----- Yes14 orSAVING%,%%%.%%%KB • save modeFORMAT####KB/&&&&KBThe storage area is being initialised. ----- Yes15 orFORMAT%,%%%.%%%KB •16 NOW LOADING… •TrueType font or BASIC program is ----- Yesbeing downloaded.17 MEMORY WRITE ERR. • An error has occurred while writing to No Yesflash memory or USB memory.An erase error has occurred while No Yes18 FORMAT ERROR • formatting the flash memory or USBmemory.19 MEMORY FULL • Data cannot be stored because the flash No Yesmemory or USB memory is full.Display of error messageA command error has occurred while Yes Yes20 • (See Notes.)analyzing the command.