Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

2. PRINTER SETUP ENGLISH VERSION EO1-330892.8 Print Test2.8 Print Test After your operating environment has been set, perform a print test.1. Perform a print test by using the Printer Driver or an Issue Command.The printer driver’s Properties screen allows you to set thecommunication conditions, media size, and other printing conditionsin accordance with your operating environment. For details, refer tothe Help for the Windows Printer Drivers screen.Example: Stock tab display of the Printer Driver’s Properties ScreenPrint MethodSensorLabel GapIssue ModePost-print Action(Cut)Print SpeedFine AdjustmentPrint Method:Sensor:Issue Mode:Post-print Action:Fine Adjustment:Direct thermal or thermal transfer is selectable.Media sensor type is selectable.Batch, strip or cut is selectable.Whether to use the cutter or not is selectable.Adjustment values for the feed amount, cut/stripposition, etc. can be set.2. Confirm the print test result.• When a print start position, cut/strip position, or print tone needs tobe adjusted: ⇒ Section 2.9 Position and Print Tone FineAdjustment• When pre-printed media is used, and if a print start position is notproperly detected: ⇒ Section 2.10 Threshold SettingE2-58