Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

2. PRINTER SETUP ENGLISH VERSION EO1-330892.9 Position and Print Tone Fine Adjustment2.9.1 Fine Adjustment(Cont.) (3) BACK ADJ.Reverse feed amount to the next print start position is fine adjusted.9.9mm9.8mm-9.8mm-9.9mm• Example of Reverse Feed Amount Fine AdjustmentWhen setting +3.0 mmCompared with “+0.0mm” position, the print start positionafter a reverse feed is shifted forward.Feed Direction3mmPrint Start Position after areverse feedWhen setting +0.0 mmFeed DirectionWhen setting –3.0 mmCompared with “+0.0mm” position, the print start positionafter a reverse feed is shifted backward.Feed Direction3mmPrint Start Position after areverse feedPrint Start Position after areverse feedNOTE:Depending on the print conditions, a label may not return to the homeposition with a reverse feed, even if a reverse feed amount is specified tothe same length as the forward feed.On the following conditions, the media may not return to the homeposition, resulting in an error.• The media sensor is used.• The media pitch is almost the same as the distance between the printhead and the media sensors (75.5 mm.)• A printer action includes a reverse feed (such as cut issues, strip issues,and automatic forward feed standby.)To prevent an error from occurring, the reverse feed amount needs to beincreased by performing the back feed fine adjustment in the positive (+)direction.E2-63