Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

2. PRINTER SETUP ENGLISH VERSION EO1-330892.3 Loading Supplies2.3.2 Loading the Ribbon(Cont.)3. Slide the Ribbon Stoppers along the Ribbon Shafts to a position wherethe ribbon is centred when fitted.4. Lower the Print Head Block and set the Ribbon Shaft Holder Platealigning its holes with the Ribbon Shafts.5. Take up any slack in the ribbon. Wind the leading tape onto theribbon take-up roll until the ink ribbon can be seen from the front ofthe printer.Ribbon ShaftHolder Plate6. Turn the Head Lever to Lock position to close the Print Head.7. Close the Top Cover.• Auto Ribbon Saving ModeWhen the optional Ribbon Saving Module (B-EX904-R-QM-R) isinstalled, it is possible to reduce ribbon loss by stopping the ribbon feedfor non-print areas. To activate the ribbon save, at least the followingnon-print area is required:203 dpi mode(mm)Print speed 3 ips 6 ips 10 ips 12 ips 14 ipsMin. non-print area 20 20 35 60 75305 dpi model(mm)Print speed 3 ips 5 ips 8 ips 10 ips 12 ips 14 ipsMin. non-print area 20 20 25 35 60 75E2-11