Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

2. PRINTER SETUP ENGLISH VERSION EO1-330892.8 Print Test2.8 Print Test (Cont.) • When using a Strip Module or an optional Cutter ModuleIt is necessary to set the issue mode, cut/strip position, etc. on the PrinterDriver or with TPCL (TEC Printer Command Language) in accordancewith your printing condition.For details of the TPCL, refer to the B-EX4T/EX6T Series ExternalEquipment Interface Specification.Regarding how to use the Printer Driver, refer to the Help for theWindows Printer Drivers screen.To gain maximum performance and life from the Cutter Module or StripModule, periodic cleaning is required.Before starting a cleaning, be sure to TURN OFF the printer to avoid riskof injury.For details of cleaning, refer to Section 4.1.3 Optional Cutter Module.E2-59