Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

More documents

Recommendations

Info

2. PRINTER SETUP ENGLISH VERSION EO1-330892.6 Printer Setting2.6.11 Real Time Clock (RTC) The RTC menu allows setting the date and time, enabling the batterycheck function, and selecting the RTC data renewal timing while printing.SYSTEM MODEBASICFOR FACTORYRFIDRTCThe Real Time Clock Setting is effective only when an optional RTC &USB Host Interface Card, B-EX700-RTC-QM-R, is installed.(1) DATE TIMEThis parameter is to set date and time.YY/MM/DD00 00 00 [RIGHT]Hh:mm:ss00 0000(2) BATTERY CHECKThis parameter is to choose whether or not to enable the low batterycheck function.• OFF• ON(3) RENEWALThis parameter is to choose when date and time are updated whileprinting.• BATCH• PAGEAs the real time clock data is read only for thefirst media in a batch the same time is printed onthe all media.As the real time clock data is read at the start ofprinting each media, a real time can be printed oneach media.E2-38
2. PRINTER SETUP ENGLISH VERSION EO1-330892.6 Printer Setting2.6.12 Copying Data to/fromUSB MemorySYSTEM MODERFIDRTCZ-MODEUSB MEMORYThe USB Memory menu allows copying data from a USB memory to theprinter and saving data from the printer to a USB memory.USB memory can be used only when an optional RTC & USB HostInterface Card, B-EX700-RTC-QM-R, is installed.(1) USB TO PRINTERThis parameter is to copy data from a USB memory to the printer.• COPIED DATA• CONFIG FILEData including firmware (BOOT/MAIN/CG/KANJI/HTML), storage area information,and parameter settingsFile containing firmware (BOOT/MAIN/CG/KANJI/HTML)1. When the file selection screen is displayed, choose a file to be copied.2. The confirmation message is displayed.3. The data is read from the USB memory. It takes 3 to 5 minutes toread all information.(2) PRINTER TO USBThis parameter is to save the firmware (BOOT/MAIN/CG/KANJI/HTML), storage area information, and parameter settings to aUSB memory.• ALL1. The confirmation message is displayed.2. The data is copied to the USB memory. It takes approx. 40 seconds tosave all information.NOTE:If a file with the same namealready exists in the USBmemory, it will be overwritten.A file is automatically created in the USB memory and named in thefollowing format based on the printer model and saved date./ATA0/SYSTEM/B-EX4T1-T1105.DAT(e.g. B-EX4T Type1, 305 dpi model, November 5)E2-39
Page 3 and 4: TOSHIBA Barcode PrinterB-EX4T1 SERI
Page 10 and 11: 1. PRODUCT OVERVIEW ENGLISH VERSION
Page 12: 1. PRODUCT OVERVIEW ENGLISH VERSION
Page 15 and 16: 2. PRINTER SETUP ENGLISH VERSION EO
Page 51: 2. PRINTER SETUP ENGLISH VERSION EO
Page 81 and 82: 2.PRINTER SETUPENGLISH VERSION EO1-
Page 83 and 84: 2.PRINTER SETUPENGLISH VERSION EO1-
Page 85 and 86: 3. ON LINE MODE ENGLISH VERSION EO1
Page 91 and 92: 4. MAINTENANCE ENGLISH VERSION EO1-
Page 93 and 94: 5. TROUBLESHOOTING ENGLISH VERSION
Page 99 and 100: 6. PRINTER SPECIFICATIONS ENGLISH V
Page 101 and 102: 7. SUPPLY SPECIFICATIONS ENGLISH VE
Page 103 and 104:
7. SUPPLY SPECIFICATIONS ENGLISH VE
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
APPENDIX 1 MESSAGES AND LEDSENGLISH
Page 111 and 112:
APPENDIX 2 INTERFACEENGLISH VERSION
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
APPENDIX 3 PRINT SAMPLESENGLISH VER
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
APPENDIX 4 GLOSSARIESENGLISH VERSIO
show all

Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?