Merlins Ralliart and EvoX TUNING GUIDE Version K.pdf - EvoScan

MERLINS RALLIART & EVOLUTION-X TUNING GUIDEAPPENDIX 2: USEFUL INFORMATIONA2.1: PRESSURE CONVERSIONS1 bar = 100 kPa1 bar = 1000 mbar1 bar = 750 mm of Hg1 bar = 29.53 inch of Hg1 bar = 14.503 psi1”Hg = 0.49121”Hg = 3.38641”Hg = 33.8641psi = 2.0361psi = 6.8947psikPambar“HgkPa1kg/cm = 14.2231kg/cm = 99.06psikPaA2.2: SERVICE REMINDER RESETThe RALLIART and EVO X Multi Information Meter, located between the speedo andtacho, will show a multitude of information and fault indications etc and it alsoshows when the next service is due. This not will explain how to reset the counterafter servicing the car.1. Set the IGNITION switch to the OFF position.2. Press the INFO button and ODOMETER button until NEXT SERVICE is shown.3. Press and hold the INFO button for two seconds, the SERVICE INDICATORwrench symbol will flash.4. While the SERVICE INDICATIOR is flashing, press and hold the INFO button fortwo seconds.5. The SERVICE INDICATOR should now show the message CLEAR for threeseconds to confirm the SERVIVE INTERVAL has been correctly reset.REV: 0.K merlin@three.com.au Page 117 of 134