Merlins Ralliart and EvoX TUNING GUIDE Version K.pdf - EvoScan
Merlins Ralliart and EvoX TUNING GUIDE Version K.pdf - EvoScan
Merlins Ralliart and EvoX TUNING GUIDE Version K.pdf - EvoScan
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MERLINS RALLIART & EVOLUTION-X <strong>TUNING</strong> <strong>GUIDE</strong>Spark maps, for MAF air temps less than 77˚F / 25˚C, use BARO+IAT compensatedLoad.Spark maps, for MAF air temps more than 77˚F / 25˚C, BARO compensated Load.Fuel maps, normally use BARO+IAT compensated Load.Fuel maps use un-compensated Load when load is less than 20 while in Closed Loop.Enter the HEX addresses from the table for your ROM into the MUT TABLE to enable2-byte logging of LOAD.They are entered on the top line of the table, starting at the left. Ignore the FFFFbits. Data is to be entered in the usual way for HEX, eg 0x6b12. <strong>EvoScan</strong> is alreadysetup to log the following 2-byte data:Figure 81:MUT TABLE, 53610010 RALLIARTREV: 0.K merlin@three.com.au Page 120 of 134
Change language