Merlins Ralliart and EvoX TUNING GUIDE Version K.pdf - EvoScan

MERLINS RALLIART & EVOLUTION-X TUNING GUIDE1.9-SETTING THE DEFAULT COLOUR MAPTo set or change the COLOUR MAP style, select:File \ OptionsThen click on:Default Color Map to get the window shown below.Scroll through the selections and select whatever suites, as some colour stylesdisplay better than others or allow easier data viewing. Some of the more readablestyles with good graduation are:BLUORNG, COLDFIRE, FIRESTRM, JFAN, PALE, RAINBOW, VULCANO, SUNSHINE.FIRESTRM, for example is very good for fuel maps.Click on:Apply then close the window.Figure 5:EcuFLASH – DEFAULT COLOUR MAP STYLEThe colour maps can be tweaked to your own tastes. Open the .MAP file to beedited with NOTEPAD. The data is organized in columns, by the three primarycolours: red, yellow, blue. The higher the number the percentage that colour.REV: 0.K merlin@three.com.au Page 18 of 134