Range Rover Workshop Manual - Eng - Landiesrus

12ENGINE NEW RANGE ROVER46. Release feed pipe clip from bracket. Place pipeaside.47. Disconnect multiplug from gearbox oiltemperature sensor.48. Disconnect 2 pipes from air conditioningcondenser. Remove ’O’ rings and discard.49. Disconnect 2 pipes from air conditioningcompressor. Remove ’O’ rings and discard.Place pipes aside.50. Remove 2 nuts and bolts securing radiatormountings to chassis.51. With assistance, raise radiator assembly foraccess to condenser cooling fan connections.Manual Vehicles:58. Remove centre console. See CHASSIS ANDBODY, Repair.59. Remove 6 nuts securing gaiter ring. Removering and gaiter.60. Remove 2 bolts securing gear lever. Removelever.52. Disconnect 2 condenser cooling fan multiplugs.53. With assistance, remove radiator/condenser/oilcooler assembly.Manual Vehicles:54. Clamp clutch flexible hose using an approvedbrake hose clamp.55. Remove clip securing flexible hose to gearboxbracket.56. Disconnect clutch flexible hose at gearbox pipe.Position hose aside.Automatic Vehicles:All Vehicles:61. Release handbrake. Release handbrake cableclevis pin.57. Remove window switch pack. SeeELECTRICAL, Repair.10 REPAIR