Range Rover Workshop Manual - Eng - Landiesrus

12ENGINE NEW RANGE ROVER23. Remove 2 bolts securing fuse box. Pivot fusebox for access.24. Disconnect engine harness multiplug from baseof fuse box.25. Release earth wire from valance stud.26. Disconnect 2 engine harness multiplugs frommain harness.27. Release engine harness clip from valance. Tieharness aside over engine.28. With assistance, release bonnet struts from bodylocations. Retain bonnet in vertical position usingstay clips.29. Depressurise fuel system. See FUEL SYSTEM,Repair.30. Remove air cleaner. See FUEL SYSTEM,Repair.31. Drain cooling system. See COOLING SYSTEM,Repair.32. Discharge air conditioning system. See AIRCONDITIONING, Adjustment.33. Remove cooling fan and viscous coupling. SeeCOOLING SYSTEM, Repair.34. Remove front grille. See CHASSIS AND BODY,Repair.35. Remove 4 bolts securing bonnet platform.WARNING: Only open the bonnet to thevertical position with the vehicle on ahorizontal surface in the workshop. Thisposition is not intended to be used outdoorswhere the bonnet could be affected by winds.36. Release straps securing bonnet release cable toplatform. Remove platform.37. Remove 2 studs securing each radiator airdeflector. Remove both deflectors.8 REPAIR