Range Rover Workshop Manual - Eng - Landiesrus

LAND ROVER V878. Remove oil filler cap.79. Place cloth over plenum chamber to protect fromdamage during lifting.80. Shorten front chain of lifting bracket to 2 links asshown.83. Raise power unit and draw forward. Lowersupport from transmission.NOTE: Power unit must be tilted at anangle of approximately 45 degrees beforeit can be withdrawn from enginecompartment.84. Remove engine/transmission assembly.Refit85. Raise power unit. Guide into engine bay.86. Position transmission jack beneath transmissionbrake drum.87. With assistance, raise transmission and lowerengine until engine mountings can be fitted.CAUTION: Ensure all under body wax isremoved from mating surfaces of fixingsbefore fitting.81. Fit lifting bracket to engine lifting eyes. Attachsuitable hoist.82. Raise engine slightly. Ensure that lifting bracketdoes not foul bulkhead. Remove both enginemountings.NOTE: It may be necessary to lowergearbox support slightly during aboveoperation.REPAIR13