Range Rover Workshop Manual - Eng - Landiesrus

LAND ROVER V8ENGINE AND GEARBOX - up to 99MYService repair no - 12.37.01/99Remove1. Position vehicle on four post lift.2. Remove battery. See ELECTRICAL, Repair.3. Remove ECM. See FUEL SYSTEM, Repair.4. Remove 2 screws securing engine harnessclamp to battery tray. Collect clamp.5. Release starter feed wire from battery terminalclamp.6. Release earth lead from alternator bracket.7. Release fuel return hose clip. Release fuel returnhose from regulator connecting pipe.8. Release fuel feed pipe from fuel rail.9. Disconnect multiplug from purge valve.10. Release purge hose from ram pipe housing.11. Remove purge valve securing bolt from shockabsorber turret. Place valve aside.12. Disconnect multiplug from air flow meter.13. Release harness from intake hose.14. Slacken clip securing intake hose to plenumchamber.15. Remove intake hose/air flow meter assembly.16. Position harness across engine.17. Disconnect throttle and cruise control cablesfrom throttle linkage.18. Release cables from abutment bracket.19. Disconnect top hose from inlet manifold.20. Disconnect heater hose from inlet manifold.Release hose from clip. Place hose aside.21. Disconnect coolant hose from plenum chamberwater jacket. Release hose from 2 clips. Placehose aside on valance.22. Remove 4 bolts securing battery tray. Removebattery tray.REPAIR7