Range Rover Workshop Manual - Eng - Landiesrus

LAND ROVER V8RefitCAUTION: Ensure all under body wax isremoved from mating surfaces of fixingsbefore fitting.10. Fit mounting to gearbox, fit bolts and tighten to45 Nm (33 lbf.ft)11. Using assistance, fit crossmember to chassis.12. Fit nuts and bolts and tighten to 45 Nm (33lbf.ft)13. Fit transmission snubber bar.14. Fit NEW flange nuts and bolts securingtransmission mount to crossmember and tightento 45 Nm (33 lbf.ft)15. Remove transmission stand.16. If applicable, align rear of side acoustic covers tocrossmember and secure with bolts.6. Remove 3 of 4 nuts and bolts securing each sideof crossmember to chassis.7. With assistance, remove remaining bolt securingcrossmember and remove crossmember.8. Remove 4 bolts securing mounting to gearbox.9. Remove mounting assembly.REPAIR37