Range Rover Workshop Manual - Eng - Landiesrus

12ENGINE NEW RANGE ROVER161. Fit ECM. See FUEL SYSTEM, Repair.162. Fit throttle and cruise control cables to abutmentbracket. Secure cruise control cable with ’C’ clip.163. Position cable trunnions to throttle linkage.Secure with clevis and split pins.164. Adjust throttle cable free-play. See FUELSYSTEM, Adjustment.165. Adjust cruise control cable. See CRUISECONTROL, Adjustment.166. Fit intake hose and air flow meter assembly toplenum chamber. Secure with clip. Connectmultiplug to air flow meter.167. Connect multiplug to purge valve.168. Position purge valve on shock absorber turret.Secure with bolt.169. Connect purge hose to ram pipe housing.170. Secure harness to clip on intake hose.171. Fit air cleaner. See FUEL SYSTEM, Repair.172. Remove plugs from fuel hoses and fuel railconnections.173. Connect fuel feed pipe to fuel rail. Tighten to 16Nm (12 lbf.ft)174. Connect return hose to pressure regulator pipe.Secure with clip.175. Refit battery. See ELECTRICAL, Repair.176. With assistance, release bonnet stay clips.Engage bonnet struts.ENGINE AND ANCILLARIES - from 99MYService repair no - 12.41.01.99Remove1. Drain engine oil and remove oil filter.2. Remove radiator. See COOLING SYSTEM,Repair.3. Remove ignition coils. See FUEL SYSTEM,Repair.4. Position absorbent material to catch any fuelspillage and disconnect fuel pipe from rail.CAUTION: Plug the connections.CAUTION: Ensure bonnet stay clips arereturned to their original positions asshown.5. Disconnect MAF sensor multiplug.177. Start engine. Check for fuel, coolant and oilleaks.16 REPAIR