Range Rover Workshop Manual - Eng - Landiesrus

LAND ROVER V89. Remove screw securing dipstick tube to rockercover.10. Remove H.T. leads from spark plugs and guideclips on rocker covers.12. Remove rocker cover.13. Remove and discard rocker cover gasket.Refit14. Clean mating faces between rocker cover andcylinder head.15. Refit rocker cover to cylinder head using a newgasket.16. Fit rocker cover bolts and tighten by diagonalselection to :Stage 1 - 4 Nm (3 lbf.ft)Stage 2 - 8 Nm (6 lbf.ft)Stage 3 - Re-torque to 8 Nm (6 lbf.ft)17. Refit H.T. leads to spark plugs. Secure leads torocker cover clips.18. Align dipstick tube. Secure to rocker cover withscrew.19. Reconnect purge hose to ram pipe housing.20. Refit plenum chamber. See FUEL SYSTEM,Repair.21. Secure heater hose to clip on inlet manifold.22. Secure fuel pressure regulator return pipe in clip.23. Reconnect fuel feed pipe to fuel rail.24. Reconnect breather hose to rocker cover.25. Reconnect battery negative lead.11. Remove 4 bolts securing rocker cover to cylinderhead.REPAIR43