Thermo Scientific Multidrop® 384 - Lab Equipment, Industrial ...

Chapter 6: Routine Operation
3. Carefully place the eight tubes below the pump rotor and insert the lower part of the cassette into
the lower part slots of the pump body (Fig. 6.3). Check that the tubes are freely placed below the
rotor and the tension limiting wires below the rotor shaft.
Lower part slots
Fig. 6.3 Inserting the lower part of the dispensing cassette into its slots
4. Take a firm grip on the upper part of the cassette with your right hand and carefully pull the tubes
around the rotor until the upper part reaches and fits into the upper part slots of the pump body
(Fig. 6.4 and Fig. 4.1).
Fig. 6.4 Inserting the upper part of the dispensing cassette
Thermo Scientific Multidrop ® 384 User Manual; Rev. 3.4, Cat. no. 1507010 23