Thermo Scientific Multidrop® 384 - Lab Equipment, Industrial ...

More documents

Recommendations

Info

8. Close the bag firmly and leave the instrument in the bag for at least 24 hours. 9. Remove the instrument from the bag. 10. Clean the instrument using a mild detergent. 11. Remove any stains using 70% ethanol. Chapter 7: Maintenance 12. Flush the fluid path of the instrument with deionized distilled water using the priming procedure. 13. The dispensing cassette must be autoclaved. 14. Also wash and disinfect the reagent containers. 15. After performing this decontamination procedure, enclose a signed and dated Certificate of Decontamination both inside the transport package and attached to the outside of the package. 7.9 How to pack for service When you ship the instrument for service remember to: • Inform about the use of hazardous materials. • Decontaminate the instrument beforehand. • Pack the instrument according to the enclosed packing instructions. • Use the original packaging to ensure that no damage will occur to the instrument during shipping. Any damage will incur additional labor charges. • Enclose a dated and signed Certificate of Decontamination (see section 9.4.1.1) both inside and attached to the outside of the package, in which you return your instrument (or other items). • Enclose the return authorization number (RGA) given by the Thermo Fisher Scientific representative. • Indicate the fault after you have been in touch with your local Thermo Fisher Scientific representative or the Thermo Fisher Scientific technical service department. See section 8.1 for details on storage and transportation temperatures. 7.10 Service contracts It is recommended you maintain and service the instrument regularly every twelve months on a contract basis by the manufacturer's trained service engineers. This will ensure the product is properly maintained and gives trouble-free service. Contact the Thermo Fisher Scientific technical service department for more details. 7.11 Disposal of the instrument 1. Decontaminate the instrument prior to disposal. See sections 7.8, 9.4.1 and 9.4.1.1 on decontamination. Also wash and disinfect the dispensing cassettes prior to disposal. 2. Follow laboratory and country-specific procedures for biohazardous or radioactive waste disposal. Dispose of the instrument according to the legislation stipulated by the local authorities concerning take-back of electronic equipment and waste. The proposals for the procedures vary by country. Thermo Scientific Multidrop ® 384 User Manual; Rev. 3.4, Cat. no. 1507010 58
Chapter 7: Maintenance WEEE symbol Thermo Fisher Scientific has contracted with one or more recycling/disposal companies in each EU Member State (European Country), and this product should be disposed of or recycled through them. Further information on Thermo Fisher Scientific’s compliance with these Directives, the recyclers in your country, and information on Thermo Scientific products which may assist the detection of substances subject to the RoHS Directive are available at www.thermo.com/WEEERoHS. 3. Regarding the original packaging and packing materials, please use the recycling operators known to you. 4. For more information, contact your Thermo Fisher Scientific representative. Thermo Scientific Multidrop ® 384 User Manual; Rev. 3.4, Cat. no. 1507010 59
Page 1:
Thermo Scientific Multidrop ® 384
Page 4 and 5:
CONTENTS Thermo Scientific Multidro
Page 6 and 7:
7.4 HOW TO REPLACE THE FUSES ......
Page 8 and 9:
1 SAFETY SYMBOLS AND MARKINGS Chapt
Page 10 and 11: 3 INTRODUCTION TO THE MULTIDROP 384
Page 12 and 13: 4 FUNCTIONAL DESCRIPTION 4.1 Instru
Page 14 and 15: 2 1 3 Chapter 4: Functional Descrip
Page 16 and 17: 4.2 Multidrop 384 microplate dispen
Page 18 and 19: 5.2.3 Checking for damage during tr
Page 20 and 21: 3. Visually check that you did not
Page 22 and 23: 5.5 Operating precautions and limit
Page 24 and 25: 6.3 How to insert the priming vesse
Page 26 and 27: Chapter 6: Routine Operation Note:
Page 28 and 29: The plate adapter is inserted into
Page 30 and 31: Chapter 6: Routine Operation 5. To
Page 32 and 33: 6.5 How to use the control panel Ch
Page 34 and 35: 6.7 How to prime Chapter 6: Routine
Page 36 and 37: 6.8.4 After use Chapter 6: Routine
Page 38 and 39: 7 MAINTENANCE 7.1 Regular and preve
Page 40 and 41: 7.4 How to replace the fuses 1. Swi
Page 42 and 43: 7.5 How to recalibrate the dispensi
Page 44 and 45: Calibration screw cover opened Chap
Page 46 and 47: Fig. 7.9 Removing the filled micros
Page 48 and 49: Chapter 7: Maintenance 4. Replace t
Page 50 and 51: Fig. 7.17 Pressing the tube fastene
Page 52 and 53: Chapter 7: Maintenance 7. First pla
Page 54 and 55: Chapter 7: Maintenance 11. Insert t
Page 56 and 57: 16. Fasten the front cover retainin
Page 58 and 59: Chapter 7: Maintenance 18. When the
Page 62 and 63: 8 TECHNICAL SPECIFICATIONS 8.1 Gene
Page 64 and 65: 8.3 In conformity with the requirem
Page 66 and 67: Chapter 8: Technical Specifications
Page 68 and 69: 9 TROUBLESHOOTING 9.1 Troubleshooti
Page 70 and 71: 9.3 Hazards Chapter 9: Troubleshoot
Page 72 and 73: 9.4.1.1 Certificate of Decontaminat
Page 74 and 75: 11 ORDERING INFORMATION 11.1 Instru
Page 76 and 77: 11.7 List of spare parts Code Item
Page 78 and 79: 12.1 Keywords for web pages Chapter
Page 80 and 81: Chapter 13: Index Fuses............
Page 82 and 83: Chapter 13: Index T Table of Figure
Page 84 and 85: Chapter 14: Table of Figures FIG. 7
Page 86 and 87: Appendix 2: Thermo Scientific Multi
Page 88 and 89: Thermo Scientific Multidrop ® 384
Page 90: Thermo Scientific Multidrop ® 384
show all

Thermo Scientific Multidrop® 384 - Lab Equipment, Industrial ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?