Thermo Scientific Multidrop® 384 - Lab Equipment, Industrial ...

Chapter 6: Routine Operation
7. Insert the microplate onto the plate adapter. Push the microplate at the same time towards the
left-hand top corner of the plate adapter while you fasten the front screws (Fig. 6.14).
Fig. 6.14 Fastening the front screws of the plate adapter
8. Then fasten the screws to the right of the plate carrier, pushing the microplate simultaneously
towards the left-hand corner of the plate adapter (Fig. 6.15). If the instrument is used for robotics,
leave sufficient moving space for the microplate according to the robotic specifications.
Fig. 6.15 Fastening the screws to the right of the plate carrier
Note: Ensure the dispensing cassette is attached and the rotor cover has been pulled
over the rotor.
Thermo Scientific Multidrop ® 384 User Manual; Rev. 3.4, Cat. no. 1507010 29