Thermo Scientific Multidrop® 384 - Lab Equipment, Industrial ...

7.2 How to wash the dispensing cassette
Chapter 7: Maintenance
Wash the tubes by priming them first with tap water and then with deionized distilled water. Make sure
that all the tubes are washed properly.
If cleaning with water is insufficient, use a mild laboratory detergent and then prime with large
amounts of tap water followed by deionized distilled water.
The dispensing cassette can be dried at room temperature.
After washing, store the dispensing cassette in the rest position (Fig. 6.18).
If the instrument is not used for a couple of hours, insert the dispensing cassette into the rest position.
Refer to section 6.8.4 After use. Handle the dispensing cassette with great care so that you do not
damage the tubes and dispensing tips. These factors will affect the service life of the dispensing
cassette.
7.3 How to autoclave the dispensing cassette
The standard tube dispensing cassette (Cat. no. 24072670) can be autoclaved 50 times with the same
tubes.
The autoclaving conditions of the dispensing cassette are as follows: 1 bar pressure at 121°C for
20 minutes.
Note: After autoclaving, the dispensing cassette must cool down to room temperature
before use.
Thermo Scientific Multidrop ® 384 User Manual; Rev. 3.4, Cat. no. 1507010 37