RBT-001 Module - User Manual v.1.2

DescriptionThis command is used to request park mode on a given link with userspecified parameters.PacketType REQOpcode GAP_ENTER_PARK_MODEDataLength 10DataBdAddr6 bytesThe Bluetooth address of the remote device of which to put the linkin park mode.BeaconMaxInterval2 bytesAcceptable longest length of the interval between beacons.BeaconMinInterval2 bytesAcceptable shortest length of the interval between beacons.DescriptionResponse to the request above.PacketType CFMOpcode GAP_ENTER_PARK_MODEDataLength 1DataStatus1 byteERROR_OKERROR_UNSPECIFIED_ERRORERROR_INVALID_NO_OF_PARAMETERSERROR_NO_CONNECTIONExit Park ModeDescriptionThis command is used to exit a current park mode on a given link.PacketType REQOpcode GAP_EXIT_PARK_MODEDataLength 6DataBdAddr6 bytesThe Bluetooth address of the remote device of which to exit thecurrent park mode.DescriptionResponse to the request above.PacketType CFMOpcode GAP_ENTER_PARK_MODEDataLength 1DataStatus1 byteERROR_OKERROR_UNSPECIFIED_ERRORERROR_INVALID_NO_OF_PARAMETERSERROR_NO_CONNECTIONEnter Hold ModeDescriptionThis command is used to request Hold mode on a given link with userspecified parameters.PacketType REQOpcode GAP_ENTER_HOLD_MODEDataLength 10DataBdAddr6 bytesThe Bluetooth address of the remote device of which to put the linkin Hold mode.HoldMaxInterval2 bytesMaximum length of the Hold interval for which the Host mayactually enter into the hold mode after negotiation with the remoteHoldMinInterval2 bytesdevice.Minimum length of the Hold interval for which the Host mayactually enter into the hold mode after the negotiation with theremote device.RoboTech Bluetooth Serial ModuleUser Manual Ver. 1.236