RBT-001 Module - User Manual v.1.2
RBT-001 Module - User Manual v.1.2
RBT-001 Module - User Manual v.1.2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DescriptionResponse to the request above.PacketType CFMOpcode SET_DEFAULT_LINK_POLICYDataLength 1DataStatus1 byteERROR_OKERROR_INVALID_NO_OF_PARAMETERSERROR_ILLEGAL_LINK_POLICYGet Default Link PolicyDescriptionThis command is used to read the default link policy setting from NVS.PacketType REQOpcode GET_DEFAULT_LINK_POLICYDataLength 0DescriptionResponse to the request above.PacketType CFMOpcode GET_DEFAULT_LINK_POLICYDataLength 2DataLinkPolicy2 byteBitfield:0x0<strong>001</strong> = Master-slave switch allowed0x0002 = Hold mode allowed0x0004 = Sniff mode allowed0x0008 = Park mode allowedSet Event FilterDescriptionThis command is used to set the event filter. The setting is stored inNVS.PacketType REQOpcode SET_EVENT_FILTERDataLength 2DataFilter1 byteDescriptionResponse to the request above.PacketType CFMOpcode SET_EVENT_FILTERDataLength 1DataStatus1 byte0x00: All events reported0x01: No ACL Link Indicators (default)0x02: No events reported, UART break still generated and detected.0x03: No events generated, UART break not generated or detected(full cable replacement)ERROR_OKERROR_INVALID_NO_OF_PARAMETERSERROR_LIMITRoboTech Bluetooth Serial <strong>Module</strong><strong>User</strong> <strong>Manual</strong> Ver. 1.265