RBT-001 Module - User Manual v.1.2

PaCtrl1 byteModulationCtrl1 byteModulationPattern8 bytesModulationPayload1 byteOptions1 byteReserved for future useModulation Control:0: No modulation1: Access code only (68 us TX data every 1250 us)2: Bluetooth DH1 packet with defined payload3: Bluetooth DM1 packet (17 bytes)4: Bluetooth DH1 packet (27 bytes)5: Invalid6: Invalid7: Bluetooth HV3 packet (30 bytes)8: Invalid9: Bluetooth AUX1 packet (29 bytes)10: Bluetooth DM3 packet (121 bytes)11: Bluetooth DH3 packet (183 bytes)12: Invalid13: Invalid14: Bluetooth DM5 packet (224 bytes)15: Bluetooth DH5 packet (339 bytes)Defines Access Code modulation if ModulationCtrl = 1, elseignored.Defines one byte of payload repeated through packet ifTest = 1, else ignored0: Whitening is disabled for transmit.1: Whitening is enabled for transmit.2-255: Reserved for future use.DescriptionConfirms the request abovePacketType CFMOpcode RF_TEST_MODEDataLength 1DataStatus1 byteRead RSSIDescriptionPacketType REQOpcode READ_RSSIDataLength 6DataBdAddress6 byteDescriptionPacketType CFMOpcode READ_RSSIDataLength 2DataStatus1 byteERROR_OKERROR_INVALID_NO_OF_PARAMETERSThis command will read out the current RSSI value for given link aremote device.Confirms the request aboveRSSI1 byteBluetooth Address of the remote device for which to read out thecurrent RSSI value.ERROR_OKERROR_UNKNOWN_ERRORERROR_INVALID_NO_OF_PARAMETERSThe RSSI valueRange:0x01: Too High0x00: Good0xFF: Too LowRoboTech Bluetooth Serial ModuleUser Manual Ver. 1.271