RBT-001 Module - User Manual v.1.2
RBT-001 Module - User Manual v.1.2
RBT-001 Module - User Manual v.1.2
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Set Overrun ErrorDescriptionThis command is used to indicate that the host has detected anoverrun error. In case the remote device is a <strong>RBT</strong>-<strong>001</strong>, this remote<strong>RBT</strong>-<strong>001</strong> will send a "SPP Port Status Changed Indicator" to itsapplication.PacketType REQOpcode SPP_PORT_OVERRUN_ERRORDataLength 1DataLocalPort1 byteLocal RFCOMM port number. Range 1-30DescriptionConfirm to the request above.PacketType CFMOpcode SPP_PORT_OVERRUN_ERRORDataLength 1DataStatus1 byteERROR_OKERROR_SPP_INVALID_PORTERROR_SPP_PORT_NOT_OPENLocalPort1 byteLocal RFCOMM port number. Range 1-30Set Parity ErrorDescriptionThis command is used to indicate that the host has detected a parityerror. In case the remote device is a <strong>RBT</strong>-<strong>001</strong>, this remote <strong>RBT</strong>-<strong>001</strong>will send a "SPP Port Status Changed Indicator" to its application.PacketType REQOpcode SPP_PORT_PARITY_ERRORDataLength 1DataLocalPort1 byteLocal RFCOMM port number. Range 1-30DescriptionConfirm to the request above.PacketType CFMOpcode SPP_PORT_PARITY_ERRORDataLength 1DataStatus1 byteERROR_OKERROR_SPP_INVALID_PORTERROR_SPP_PORT_NOT_OPENLocalPort1 byteLocal RFCOMM port number. Range 1-30Set Framing ErrorDescriptionThis command is used to indicate that the host has detected a framingerror. In case the remote device is a <strong>RBT</strong>-<strong>001</strong>, this remote <strong>RBT</strong>-<strong>001</strong>will send a "SPP Port Status Changed Indicator" to its application.PacketType REQOpcode SPP_PORT_FRAMING_ERRORDataLength 1DataLocalPort Local RFCOMM port number. Range 1-301 byteRoboTech Bluetooth Serial <strong>Module</strong><strong>User</strong> <strong>Manual</strong> Ver. 1.246
Change language