RBT-001 Module - User Manual v.1.2

ErrorCodesACL Error CodesError Code0x010x020x030x040x050x060x070x080x090x0A0x0B0x0C0x0D0x0E0x0F0x100x110x120x130x140x150x160x170x180x190x1A0x1B0x1C0x1D0x1E0x1F0x200x210x220x230x240x25DescriptionUnknown HCI Command.No Connection.Hardware Failure.Page Timeout.Authentication Failure.Key Missing.Memory Full.Connection Timeout.Max Number Of Connections.Max Number Of SCO Connections To A Device.ACL connection already exists.Command Disallowed.Host Rejected due to limited resources.Host Rejected due to security reasons.Host Rejected due to remote device is only a personal device.Host Timeout.Unsupported Feature or Parameter Value.Invalid HCI Command Parameters.Other End Terminated Connection: User Ended Connection.Other End Terminated Connection: Low Resources.Other End Terminated Connection: About to Power Off.Connection Terminated by Local Host.Repeated Attempts.Pairing Not Allowed.Unknown LMP PDU.Unsupported Remote Feature.SCO Offset Rejected.SCO Interval Rejected.SCO Air Mode Rejected.Invalid LMP Parameters.Unspecified Error.Unsupported LMP Parameter Value.Role Change Not AllowedLMP Response TimeoutLMP Error Transaction CollisionLMP PDU Not AllowedEncryption Mode Not AcceptableRoboTech Bluetooth Serial ModuleUser Manual Ver. 1.273